Ensure that the installed flange does not leak oil. The installation requirements and precautions are as follows:

(1)flangeIt should have sufficient strength and should not deform when tightened. The flange sealing surface should be flat and clean, and oil stains and rust spots should be carefully cleaned during installation.
(2) The sealing gasket shall have good oil resistance and aging resistance, as well as good elasticity and mechanical strength. Installation should select sealing gaskets of different cross-sections and sizes according to the shape of the connection, and place them correctly.
(3)flangeThe fastening force should be uniform and consistent, and the compression amount of the rubber pad should be controlled at about 1/3.

flangeIn actual use, use according to normal methods and principles to ensure quality and value, and use and install according to normal usage standards.

There were no quality or performance issues. A flange is not a simple mechanical component in the usual sense, but a mechanical product carrier that contains rich technical connotations.